When you need wood stove chimney cleaning Lawrence IN, EmberHarbor Pros sends a CSIA Certified Chimney Sweep who has worked on hundreds of wood stoves across Marion County. We remove creosote, soot, and blockages from your flue, inspect the liner and firebrick, and leave your stove burning clean and safe. If your glass is blackening or smoke rolls back into the room, call us today.
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now (855) 959-5820 → No spam. No obligation. Just practical help.
Wood stove chimney cleaning Lawrence IN is the mechanical removal of creosote, soot, and debris from the flue, connector pipe, and firebox of a wood-burning stove. We run a chimney brush on flexible chimney rods through the full height of the flue, then vacuum the firebox and stovepipe with a HEPA vacuum so no ash escapes into your living room. The job also includes a visual check of the flue tiles, chimney cap, and firebrick for cracks or gaps that let smoke and heat escape.
Lawrence homeowners burn hardwood from October through March, and that steady use builds creosote fast. A stove that ran all last winter can carry a quarter-inch of glazed creosote in the flue by spring, which is the leading cause of chimney fires. If you are searching for wood stove chimney cleaning near me Lawrence IN, we schedule same-week visits across Marion County and bring drop cloths, an ash vacuum, and an inspection camera to every call.
Every wood stove cleaning covers the full flue, firebox, and stovepipe, plus a camera inspection and written report. Repairs and parts are quoted separately so you never pay for work you did not approve.
We brush the entire flue from the cap down to the firebox using chimney rods and a wire brush sized to your flue. Glazed creosote gets extra passes and a creosote sweeping log treatment. This is the step that removes the fire fuel.
A HEPA vacuum pulls ash and soot from the firebox, baffle, and connector pipe. We scrape the firebrick and wipe the glass. The goal is a firebox you could eat off, though we do not recommend it.
An inspection camera runs the full height of the flue to check flue tiles, mortar joints, and the stainless steel liner. We photograph anything questionable and show you the images. Cracks and gaps get flagged before they become a carbon monoxide problem.
We inspect the chimney cap, crown, flashing, and door gasket. A missing cap lets rain and animals in, and a flat gasket leaks smoke. We note what we find and can replace caps, crowns, and gaskets the same visit.
You get a one-page report listing what we cleaned, what we inspected, and what needs attention. Photos are attached for anything we recommend repairing. It is your record for insurance, resale, or your own peace of mind.
We lay drop cloths from the door to the stove and tape a HEPA vacuum hose at the firebox. Your floors, rugs, and furniture stay covered. This setup takes about 10 minutes and is the reason you will not find a speck of ash on the carpet when we finish.
We pull the stovepipe or baffle, then run a chimney brush on flexible chimney rods up the full flue. Glazed creosote gets a wire brush and a creosote sweeping log treatment. We work from the top down so debris falls into the firebox, not into your room.
The ash vacuum pulls soot from the firebox, baffle, and connector pipe. We scrape the firebrick and check the door gasket and glass. If the gasket is flat, we note it on your report and can replace it the same visit for a small parts charge.
An inspection camera goes up the flue to look for cracked flue tiles, gaps in mortar, and liner damage. We photograph anything we find and show you the images on the spot. This step is what separates a real cleaning from a quick brush-and-go.
We walk you through what we found, hand you a written report, and tell you when to book the next cleaning. If everything is sound, you are done for the season. If we spotted a chimney cap or crown issue, we quote it before we leave.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
A wire brush sized to your flue, run on flexible chimney rods, scrubs creosote and soot off the flue walls from the top down. We carry multiple sizes for 6-inch, 7-inch, and 8-inch flues.
A HEPA vacuum captures fine ash at the firebox while we brush, and an ash vacuum handles the bulk debris. Together they keep soot out of your living room air.
A camera on a reel runs the full height of the flue to check flue tiles, mortar, and the stainless steel liner. We photograph anything questionable and show you the images on site.
A chemical log that breaks down glazed creosote so a brush can remove it. We use it when the flue has shiny, hardened deposits that brushing alone will not touch.
Canvas drop cloths cover the path from the door to the stove, and shoe covers protect your floors. This is why customers say they cannot tell we were there.
A cap tool lets us pull and reseat the cap without damaging the mesh, and a wire brush cleans the cap screen and firebox walls. Both get used on nearly every job.
A homeowner burned two cords of oak last winter and noticed the stove smoking more each month. The flue had a quarter-inch of shiny glazed creosote, and the cap screen was half plugged with soot.
We treated the flue with a creosote sweeping log, re-brushed it to bare tile, and cleared the cap screen. Draft improved immediately, and the stove reached 500 degrees Fahrenheit in half the time it took before.
A West Hills family smelled smoke in the house every time they opened the stove door. The cap had lost its screen, and a bird had built a nest in the flue over the summer. Draft was almost zero.
We pulled the nest, cleaned the flue, and installed a new cap with a stainless mesh screen. The stove drew clean that same evening, and the smoke smell was gone. The whole visit took just over an hour.
A home in Old West Lawrence had a wood stove that had not been serviced in four years. The camera showed a hairline crack in a flue tile near the roofline, plus heavy soot in the smoke chamber.
We cleaned the flue, repaired the mortar joint, and documented the repair with photos. The homeowner avoided a $3,200 stainless steel reline because the crack was caught before it spread.
Most wood stove complaints trace back to a dirty or damaged flue. Here are the four we see most often in Lawrence.
Ask a pro →We brush the flue down to bare tile, treat glazed areas with a creosote sweeping log, and vacuum the debris. After cleaning, we show you the camera footage so you can see the flue is clear. Annual cleaning keeps buildup from returning.
We check the cap, clear any animal nest or debris, and verify the flue height meets code. If the stove is the issue, we check the baffle and gasket. Most backdraft calls are solved with a cleaning and a cap screen.
Our camera inspection finds cracks and gaps that a visual check misses. Small mortar repairs can often be done on the spot. If the liner is too far gone, we quote a stainless steel liner replacement and explain the options clearly.
We clean the flue, check the cap screen, and inspect the door gasket and baffle. Once the draft is restored, most stoves reach temperature faster and burn cleaner. Customers often cut their wood use by a quarter or more.
Most wood stove cleanings in Lawrence run $189 to $279 in 2026. That covers flue brushing, firebox and pipe vacuuming, and a camera inspection. Add $60 to $120 if the flue has heavy glazed creosote or if we need to pull and reseal the stovepipe. Chimney caps, gaskets, and crown repairs are quoted separately before we start.
Once a year if you burn a cord or less, and twice a year if you burn daily from October through March. Lawrence winters are long enough that most wood stove owners should book in late summer and again in mid-winter. If you see shiny black creosote on the flue walls, do not wait for the calendar, call us now.
Every cleaning includes flue brushing with a chimney brush and rods, firebox and stovepipe vacuuming with a HEPA vacuum, a camera inspection of the flue and liner, and a check of the cap, crown, and door gasket. You get a written report with photos. Chimney liner replacement, masonry repair, and cap installation are add-on services quoted on site.
Yes. We tape a HEPA vacuum hose at the firebox and lay drop cloths from the door to the stove before we start. The vacuum captures ash and soot as the brush knocks it loose. When we finish, we wipe down the hearth and do a flashlight walkthrough with you. Most customers say the room looks cleaner than before we arrived.
Chimney sweep near meA full chimney sweep covers the flue, firebox, and smoke chamber on open fireplaces and wood stoves. If you burn both a fireplace and a stove, we can sweep both in one visit and give you a combined report for Lawrence code records.Explore →
Emergency Chimney sweepIf you have had a chimney fire, smell smoke in the house, or see creosote flakes on the roof, call us right away. We inspect for cracked tiles and heat damage, then clean the flue so your wood stove is safe to use again.Explore →
24/7 chimney sweepOur after-hours line stays open for Lawrence homeowners with urgent chimney problems. A blocked flue on a cold night is a carbon monoxide risk, not a wait-until-Monday problem. We dispatch a certified sweep as fast as we can.Explore →
chimney cleaningStandard chimney cleaning removes soot, creosote, and debris from any flue type. We use the same top-down method on masonry and prefab chimneys, and we always finish with a camera inspection so you know what is behind the walls.Explore →
chimney cleaning near meIf you are searching for chimney cleaning near me in Lawrence, we cover every neighborhood from Downtown to West Hills. Book online or call and we will give you a two-hour arrival window, not an all-day promise.Explore →
fireplace cleaningFireplace cleaning handles the firebox, grate, and smoke shelf on open hearths. If you run a wood stove and a fireplace, we can clean both the same day and check that neither shares a flue, which is a common code violation in older Lawrence homes.Explore →
chimney inspectionA chimney inspection goes deeper than a cleaning. We check the crown, cap, flashing, liner, and masonry for water damage and cracks. It is the right call before you buy a house or after a chimney fire.Explore →
chimney inspection near meWe perform level 1, 2, and 3 inspections for Lawrence homeowners, real estate agents, and insurance claims. Level 2 includes a camera scan of the flue, which is required any time a stove or liner is changed out.Explore →Creosote does not wait, and neither should you. Call (855) 959-5820 and we will give you a flat price, a two-hour arrival window, and a certified sweep who cleans up after himself. Same-day slots are open most weekdays.
Book my cleaning (855) 959-5820 →Call (855) 959-5820 or email info@emberharborpros.com and we will get back to you the same business day. Our phones are answered Monday through Friday, 8 a.m. to 6 p.m., and the emergency line stays open 24/7 for chimney problems in Lawrence. Same-day slots are often available if you call before noon.